PP.P5G5.03.Troubleshoot
Page 16
Rev. 06/11/2003
After initial communication has been established, the
connection was then lost.
Response may be selected.
BUS
SI-B Com Err
Possible Cause(s): Connection is broken, master has stopped communicating.
Corrective Action: Check all connections, verify all user side software configurations.
505
N/A
Fault Codes
Major Fault - Motor coasts to a stop, the fault is displayed on the digital
operator, and the fault relay is activated.
Possible Cause(s): Connection is broken, master has stopped communicating.
Corrective Action: Check all connections, verify all user side software configurations.
CE
Memobus Com Err
Transmission error. Control data was not received
normally when the power supply is turned on.
Response may be selected.
ce
506 515 √
506 √ 515 √
505
To Next Page
Loading...
