PP.P5G5.03.Troubleshoot
Page 33
Rev. 06/11/2003
External baseblock command is input from the multi-
function input terminals.
A minor fault contact output can be programmed by
using the multi-function outputs.
BB
Base Block
Possible Cause(s):
A baseblock command was accepted at the multi-function input
terminals 3, 4, 5, 6, 7, or 8.
Corrective Action: Check for an external condition, verify the program parameters.
ault Codes
Minor Fault - Operation continues and the digital operator indication blinks
The fault relay does not activate.
505
506 √ 515 √
bb
To Next Page
Loading...
