YASKAWA MOTOMAN-MH5F - Home Position Return Procedures; Home Position Return After Motor Replacement

3-1
176183-1CD
HW1483638
3 Home Position Return
MH5S
(II)/MH5F
3 Home Position Return
NOTE
In the following cases, perform calibration and set the
manipulator geometrical position.
• Change in the combination of the MOTOMAN and the
control unit
• Replacement of the motor or encoder
• Clearing stored memory
• Home position deviation caused by hitting the MOTOMAN
against a workpiece, etc.
• Replacement, disassembly, and reassembly of the main
parts such as speed reducers etc.
Before the calibration, be sure that the manipulator satisfies
the following conditions.
• No external force is exerted on the manipulator.
The hand and other parts attached to the wrist unit are
removed.
19 of 99