ix
HW1485152
HW1485152
Descriptions of the programming pendant keys, buttons, and displays are
shown as follows:
Equipment Manual Designation
Programming
Pendant
Character Keys
/Symbol Keys
The keys which have characters or symbols
printed on them are denoted with [ ].
e.g. [ENTER]
Axis Keys
/Numeric Keys
[Axis Key] and [Numeric Key] are generic
names for the keys for axis operation and
number input.
Keys pressed
simultaneously
When two keys are to be pressed
simultaneously, the keys are shown with a “+”
sign between them, e.g. [SHIFT]+[COORD].
Mode Switch Mode Switch can select three kinds of modes
that are denoted as follows: REMOTE, PLAY or
TEACH.
(The switch names are denoted as symbols)
Button The three buttons on the upper side of the
programming pendant are denoted as follows:
START, HOLD, or EMERGENCY STOP.
(The button names are denoted as symbols)
Displays The menu displayed in the programming
pendant is denoted with { }.
e.g. {JOB}
E
M
E
R
G
E
N
C
Y
S
T
O
P
Numeric keys
Axis keys
Enter key
Mode switch*
Start button* Hold button*
Emergency stop button
Shift key
Page key
Coordinate key
PLAY
REMOTE
TEACH
START
*The button/switch names
are denoted as symbols.
HOLD
To Next Page
Loading...
