5 Installation Procedure
20 YASKAWA ELECTRIC TOBP C730600 75B YASKAWA AC Drive Option PG-B3 Installation Manual
6.
Route the option wiring inside the enclosure as shown in Figure 8-B. Take proper
precautions so that the front covers will easily fit back onto the drive.
Users may also choose to route the option wiring through openings on the front
cover of some models. Remove the perforated tabs on the left side of the front cover
as shown in Figure 8-A to create the necessary openings on these models.
Refer to the Peripheral Devices & Options section of the drive instruction manual for
more information.
Figure 8
Figure 8 Wire Routing Examples
A – Route wires through the openings
provided on the left side of the
front cover.
<1>
<1> The drive will not meet Enclosed wall-mounted type (UL Type 1) requirements if wiring is exposed outside the
enclosure.
B – Use the open space provided
inside the drive to route option
wiring.
TOBP_C730600_75B_1_0_E.book 20 ページ ２０１７年２月１７日 金曜日 午後３時２分
To Next Page
Loading...
