YASKAWA PROFINET V1000 User Manual

2 Product Overview
YASKAWA ELECTRIC SIEP C730600 70B V1000 Option SI-EP3/V Technical Manual 7
2 Product Overview
 About This Product
This option provides a communications connection between the drive and a PROFINET network. The option connects
the drive to a PROFINET network and facilitates the exchange of data.
This manual explains the handling, installation and specifications of this product.
PROFINET is a communications link to connect industrial devices (such as smart motor controllers, operator interfaces,
and variable frequency drives) as well as control devices (such as programmable controllers and computers) to a
network. PROFINET is a simple, networking solution that reduces the cost and time to wire and install factory
automation devices, while providing interchangeability of like components from multiple vendors.
Install the option/PROFINET option on a drive to perform the following functions from a PROFINET master device:
• Operate the drive
• Monitor the drive operation status
• Change drive parameter settings
SI-EP3/V is PROFINET Conformance Class A certified.
 Applicable Models
The option can be used with the models in Table 1.
Table 1 Applicable Models
Note: Refer to the option package labeling in the field designated “PRG” (four digit number)” or the option nameplate in the field
designated “C/N” (S + four digit number)” to identify the option software version. The nameplate is located adjacent to the PCB.
Drive Series Model Number Software Version <1>
<1> Refer to “PRG” on the drive nameplate for the software version number.
V1000 CIMR-VA ≥1012
PROFINET_E_conditional.fm 7 ページ ２０１６年６月２０日 月曜日 午後８時２分

YASKAWA PROFINET V1000 Specifications

General

Product Name	YASKAWA PROFINET V1000
Protocol	PROFINET
Series	V1000
Frequency	50/60 Hz
Protection Class	IP20
Operating Temperature	-10°C to +50°C
Humidity	95% (non-condensing)
Altitude	1000m
Storage Temperature	-20 to +60°C (-4 to 140°F)