YASKAWA SGMGH - Page 613

April 2005
0
6.1.3 (3) (a) Revision: Table of main circuit and control power supply input
7.3.1 (2) (a),
10.5.1,
12.3.2 (2), 12.4
Addition: Note for the Pn408 and Pn409 factory settings
December 2005
0
Back cover Revision: Address
March 2006
0
Based on Japanese user’s manual, SIJPS80000015C<9>-0 printed in February 2006.
October 2006
0
Based on Japanese user’s manual, SIJPS80000015C<10>-0 printed in Jury 2006.
2.1 Revision: Description for 5th digit, Design Revision Order
3.12.2 (1) Revision: Numerical values in the dimensional drawing
3.12.1 (3)
3.12.2 (3)
Addition: Specifications and dimensional drawings of SGMAH servomotors (3000 min
-1
,
750 W)
3.12.3 (1)
3.12.4 (1)
Revision: Numerical values in allowable radial load and allowable thrust load
8.1.2 (3) Revision: Signal circuit
Date of Printing
Rev.
No.
WEB
Rev.
No.
Section Revised Content
3
4
5
6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com