YASKAWA U1000 iQpump Drive - Real-time Clock Setup; Set Drive Real-time Clock

YASKAWA TOEPYAIUPW02A U1000 iQpump Drive Quick Start Procedure
U1000 iQpump Drive
Quick Start Procedure
Page 9
of 25

Real-time Clock Setup
5
STEP
Press
F1
to move the cursor to the left and
F2
to move cursor to the right. Press to adjust.
Press
ENTER
to save after setting time.
Note: DO NOT adjust Second per month.
Example: June 12
th
2012, 7:35 am
Note: After the real-time clock is set, the real-time clock setup screen will not display again unless parameter o4-17 is set to 1.
5.1 Power up the drive and set the Real-time Clock.
The Real-time Clock setup screen will appear at rst power up. Press
F2
to set the clock.
Clock Not Set
- MODE - DRV Rdy
Press F2 to Set
FWD
DATA
YYYY/MM/DD HH:MM
2012/01/01 00:00
Second per month
+ 0 sec
YYYY/MM/DD HH:MM
2012/06/12 06:35
Second per month
+ 0 sec
Date/Time Config
- PRMSET- PRG
Set
o4-17= 1
FWD
HOME
"0"
YYYY/MM/DD HH:MM
2012/06/12 07:35
Second per month
+ 0 sec