7. SETTING AND ADJUSTMENT OF EACH
MODULE
(Cent’d)
-
Model JANCD-FCI
00C
Swl : Switch for selecting 9“
CRT or EL display (EL)
mlm
NM
● Model JANCD-FC200
Swl : System number switch (16-position rotary
switch)
Swl [0]:
Normal operation mode
[1]:
End user parameter than ge mode
[4]:
Ladder edit mode
q
e.
SW1 [2], [3], and [51 to [F] are
used only for maintenance.
Only
YASKAWA service personnel must
use these switches.
“
Model JANCD-FC230B or FC260
SW1 , SW2: Switches for selecting the panel and
external switches for–apply-ing power
123
u
SW2000
1
23
m
Swlooo
n
SW2000
1
23
u
Swlooo
m
SW2000
■ Model JANCD-FC31 O-1 (-2) /FC260
D/A voltage adjustment VR: Adjusted at the
factory before delivery. Readjustment is
unnecessary.
-.
VR1: First spindle gain adjustment
VR2: First spindle zero adjustment
(VR3: Second spindle gain adjustment).
(VR4:
Second
spindle zero adjustment)
198
To Next Page
Loading...