5-2
159281-1CD
HW1480357
HP20D
5 Disassembly and Reassembly of Motors
5.1 Disassembly and Reassembly of S-Axis Motor
6. Connect the power connector of the L-axis motor. Fix the connector
on the motor side by using pliers, etc. when connecting the power
connector.
7. Remove the backup battery.
8. Turn ON the DX100 power supply.
Table 5-1: S-Axis Motor Parts Checklist
No. Name Qty. Notes
S-axis motor HW0387862-A 1 SGMRV-09ANA-YR11
GT-SA bolt M8
(length: 30 mm)
3 Tightening torque:
24.5 N•m
Input gear HW0313491-1 1
Key 1
M-base HW0305306-1 1
Hexagon socket head cap screw M6
(length: 60 mm)
Conical spring washer 2H-6
1
each
Tightening torque:
16.5 N•m
Cover HW0305809-1 1
Cross head APS bolt M5
(length: 10 mm)
4
Internal wiring harness 1
To Next Page
Loading...
