| System Settings | 39
Dual Screen Layouts
The following introduces the default layout when you connect two displays.
On one display, the remote video and the PC content is displayed in PiP mode with the remote video in
full screen and the PC content in a small window. On the other display, the PC content is displayed in full
screen.
Using Web User Interface
MeetingBar A20/A30 and CTP18 allow the administrator to access the web user interface, including
configuring the network settings, upgrading firmware, and export the log, and so on.
• Configuring the Web Server Type
• Logging into the Web User Interface
Configuring the Web Server Type
The web server type determines the protocol used for accessing the web user interface of the endpoint/
touch panel. Both HTTP and HTTPS are available. The HTTPS ensures that the configuration of all login
information (such as user names and passwords) is transmitted using an encrypted channel. If you disable
the desired protocol, you cannot access the web user interface via this protocol.
Procedure
1. On the idle screen, tap Settings > General > System Settings > Network.
2. Enter the administrator password (default: 0000) and tap Enter.
To Next Page
Loading...
