EasyManua.ls Logo

Yealink SIP-T20P - Getting Started; Packaging Contents

Yealink SIP-T20P
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Enterprise IP Phone Customizing Your Phone
- 15 -
2) Use the navigation keys to highlight the desired one in the Enabled/Disable Codecs
list, and press the
/ to move to the other list.
3) Click Confirm button to save the change.
Note:
Codec Selection can only be set via Web interface.
Contact Management
Edit/Add/Delete Contact
You can store a large number of contacts in your phone's directory. You can add, edit,
delete, dial, or search for a contact in this directory.
To add a contact via Phone interface:
1) Press MENU->Address Book->OK.
2) Press Up/Down navigation key to ADD page, Press OK button to start adding a new
contact, enter Name, phone number of the contact by the keypad. Use the 123
softkey to select between numeric and upper/lower case alphanumeric modes.
3) Press OK button to add the contact, or MENU key to cancel the change.
To edit/delete a contact via Phone interface:
1) Press MENU->Address Book ->OK.
2) Use the Up/Down navigation key to highlight the contact you want to edit/delete,
then press left/right navigation keys to EDIT/DEL page.
3) Make the desired changes, press OK button, or press MENU return to previous
menu.
To add/delete/edit the contact list via the Web interfaces:
Choose Contacts and then do the relating changes. Please refer to the instruction above
for the parameters’ detail.

Other manuals for Yealink SIP-T20P

Related product manuals