Enterprise IP Phone Using the Advanced Phone Functions
- 26 -
Maintenance Tasks
Administrator Mode
The phone allows two modes to configure the phone:
z User Mode
z Administrator Mode
Administrator mode grants unlimited access to the phone configuration on both Web
and Phone interface. User Mode is not able to access the settings on the Phone interface
such as: Accounts, Network, Reset to Factory, other phone settings.
Administrator/User Password
Administrator mode grants unlimited access to the phone configuration on both web
and phone user interface. The administrator/user password is used to access:
z Web interface along with user name.
z the advance settings of the phone such as Network, Account, Reset to Factory
Settings via the Phone interface.
The default administrator password is admin. Meanwhile the user name for Web
interface access is admin.
To change the administrator password via Phone interface:
1) Press MENU->Settings->Advanced->OK->Set Admin PWD->OK.
2) You are prompted to enter the old PWD, new PWD and Confirm PWD, Press abc
softkey to change the input method.
3) Press OK button to confirm the change, or MENU to return to previous
menu.
To change the administrator password via Web interface:
Choose Security, enter the old, new password and Confirm Password, choose Confirm
button to save the changes, or Cancel button to cancel the changes.
Reboot
You should reboot the phone when you are challenged, e.g. after applying changes to
the phone configuration.
To reboot via Web interface:
1) Choose Upgrade->Basic.
2) Click Reboot button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
