Yealink SIP-T27P User Manual

User Guide for the SIP-T27P IP Phone
140
In the following figure, the LCD screen shows an incoming call from 103 on the monitored line.
You can do the following actions:
- Press the Pick Up soft key to pick up the call.
- Press the Send soft key to dial out the monitored phone number.
- Press the New Call soft key to place a new call.
- Press the Cancel soft key to exit the screen.
Note
Configuring Directed Call Pickup Code
If you configure the directed call pickup code in advance, you can pick up the monitored user’s
incoming call by pressing the BLF key. You can configure the directed call pickup code when
configuring a BLF key. For more information, refer to Configuring a BLF Key on page 137. You
can also configure the directed call pickup code on a global or per-line basis via web user
interface.
If you enable visual alert feature, you can also pick up the monitored user’s incoming call by
pressing DPickup soft key. To use DPickup soft key to pick up the call, the call pickup code can
only be configured on a global or per-line basis via web user interface.
Note
If your phone is locked and the type of the phone lock is configured as Function Keys or All
Keys, you cannot use the Pick Up, Send, New Call and Cancel soft keys until
unlocked. For more
information refer to Phone Lock on page 35.
The pickup code is used in the following order of preference: Extension (Dsskey->Line
Key)>Directed Call Pickup Code (Account->Advanced)>Directed Call Pickup Code
(Features->Call Pickup). If pickup code is not configured, pressing the BLF key/DPickup
soft key
will directly call the monitored user when he/she receives an incoming call.

Yealink SIP-T27P Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Cappuccino, Black
Backlight keypad	Yes
Volume control	Digital
Base station keys	36
Number of programmable keys	8
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.722, G.726, G.711, G.729, G.711a, G.729A, iLBC, G.729B
Display diagonal	3.66 \
Display resolution	240 x 120 pixels
Networking standards	IEEE 802.1p, IEEE 802.3af, IEEE 802.1x, IEEE 802.1Q
RJ-9 ports quantity	2
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	210 mm
Width	265 mm
Height	170.5 mm
Package depth	225 mm
Package width	300 mm
Package height	118 mm