Yealink SIP-T33P Administrator's Guide

Phone Provisioning
100
[T42S]features.dnd.enable = 0
Custom configuration file:
Linekey.cfg
linekey.2.type=13
linekey.2.line=1
linekey.2.value = 4603
linekey.2.label=Bill
MAC-Oriented configuration files:
001565b09d886.cfg
account.1.enable = 1
account.1.label = Bill
account.1.display_name = 1023
account.1.auth_name = 1023
account.1.user_name = 1023
account.1.password = 1023
account.1.sip_server.1.address = 10.2.1.199
account.1.sip_server.1.port = 5060
3.
Place the configuration files to the home directory of the provisioning server. For example, D:\TFTP Provision.
4.
Specify the configuration files paths in the boot file as desired. For example,
y000000000000.boot
include:config<tftp:/10.2.5.193/CustomSettings.cfg>
[T46S,T48S]include:config “tftp:/10.2.5.193/Linekey.cfg”
001565b09d886.boot
include:config<tftp:/10.2.5.193/Linekey.cfg>
include:config<tftp:/10.2.5.193/001565b09d886.cfg>
5.
Place the boot files to the home directory of the provisioning server. For example, D:\TFTP Provision.
6.
Reboot the phones to trigger auto provisioning.
For the phone with MAC 001565b09d886, it will download the 001565b09d886.boot file, and then download
Linekey.cfg and 001565b09d886.cfg files referenced in the 001565b09d886.boot file in sequence from the pro-
visioning server.
For the phones except for MAC-specific phone, they will request to download the y000000000000.boot file, and
then request to download the referenced files. The phone-specific configuration file Linekey.cfg only applies to
T46S and T48S phones. The only difference is that T46S and T48S phones will download both the two files since
the exclude mode is disabled by default. The other phones will only download the CustomSettings.cfg file.
For the parameter settings in the CustomSettings.cfg file, the phone-specific parameters will only take effect on the
specific phone models.
The following shows the provisioning flowchart for different phone models with phone-specific settings.

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm