Yealink SIP-T33P Administrator's Guide

Directory
326
Devices
Parameter
local_contact.icon.url <y0000000000xx>.cfg
Description
It configures the access URL of a TAR contact icon file.
The format of the contact icon must be *.png, *.jpg, *.bmp.
The contact icon file should be compressed as a TAR file in advance and then place it to the pro-
visioning server.
Example:
local_contact.icon.url = tftp://192.168.10.25/photo2.tar
Permitted
Values
URL within 511 characters
Default
Blank
Supported
Devices
T57W, T48U, T48S, T48G
Example: Adding Contacts Using a Contact File
The following example shows the configuration for customizing a local contact file.
Customize the contact file “contact.xml” and place the contact file “contact.xml” and custom contact source (avatars
or icons) to the provisioning server “http://192.168.10.25”.
Example
local_contact.photo.url = http://192.168.10.25/Lily_photo.jpg
local_contact.data.url = tftp://192.168.10.25/contact.xml
During auto provisioning, the phone connects to the provisioning server “192.168.10.25”, and downloads the local
contact file “contact.xml” and an avatar “Lily_photo.jpg”. You can view the contacts on their phone, and specify the
avatar “Lily_photo.jpg” for a contact.
On T57W/T48U/T48S/T48G phones, when uploading a contact avatar, you can also upload a contact icon named
the same as this avatar, since a one-to-one correspondence between the icon and avatar. For example, an icon file
and avatar file both named ”Lily_photo.jpg” are available on the phone, the contact with specified default_pho-
to="Lily_photo.jpg" will use the corresponding name ”Lily_photo.jpg” as directory icon and avatar display.
The following shows the custom contact Lily with corresponding avatar and icon display:
Note: If you have configured to back up the local contacts to the server, the phone will download the contact file “<MAC>-con-
tact.xml” from the backup path from the server and display the downloaded contacts in the local directory list. The contacts in
the local contact file “contact.xml” downloaded from the provisioning server do not take effect.

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm