Yealink SIP-T33P Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
144
Handset Firmware Upgrade Configuration
The following table lists the parameters you can use to upgrade handset firmware.
Parameter
over_the_air.url <y0000000000xx>.cfg
Description
It configures the access URL of the handset firmware file.
Note: The priority of parameter “over_the_air.url” is lower than “over_the_air.url.w56h”/over_the_air-
.url.w53h/“over_the_air.url.w52h”.
Permitted
Values
URL within 511 characters
Default
Blank
Web UI
Settings > Upgrade > Select and update handset firmware.
Parameter
over_the_air.url.w56h <y0000000000xx>.cfg
Description
It configures the access URL of the W56H handset firmware file.
Note: The priority of parameter “over_the_air.url.w56h” is higher than “over_the_air.url”.
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
over_the_air.url.cp930w <y0000000000xx>.cfg
Description
It configures the access URL of the CP930W phone firmware file.
Note: The priority of parameter “over_the_air.url.cp930w” is higher than “over_the_air.url”.
Permitted
Values
URL within 512 characters
Default
Blank
Parameter
over_the_air.handset_tip <y0000000000xx>.cfg
Description
It enables or disables to pop up a tip when upgrading the handset firmware from the provisioning
server.
Note: It works only if “over_the_air.base_trigger” and “over_the_air.handset_trigger” are set to 0 (Dis-
abled).
Permitted
Values
0-Disabled
1-Enabled, the handset will pop up the message “Handset has a new firmware, update now?”.
Default
1
Supported
Devices
All handsets except DD phones
Parameter
over_the_air.handset_trigger <y0000000000xx>.cfg
Description
It enables or disables to upgrade the handset firmware compulsively when the handset is registered
to a phone or turned on successfully.
It is only applicable when the current handset firmware is different from the one on the provisioning
server.
Permitted
Values
0-Disabled, if “over_the_air.handset_tip” is set to 1 (Enabled), it will pop up a tip on the handset to
notify the user of firmware upgrade. If “over_the_air.handset_tip” is set to 0, you may go to Settings >
Upgrade Firmware on the handset to trigger the upgrading manually.
1-Enabled, it will upgrade the handset firmware compulsively without a pop-up tip on the handset.

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm