Yealink SIP-T33P Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
239
Default
Blank
Parameter
custom_softkey_call_in.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the CallIn state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
custom_softkey_connecting.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the Connecting state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
custom_softkey_dialing.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the Dialing state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Supported
Devices
All phones except T57W, T48U, T48S and T48G
Parameter
custom_softkey_ring_back.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the RingBack state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
custom_softkey_talking.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the Talking state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Example: Setting the Soft Keys Layout in Talking State
The following example shows the configuration for setting the soft key layout in the talking state.
Customize a softkey layout file “Talking.xml” and place this file to the provisioning server “http://192.168.10.25”.
Example
phone_setting.custom_softkey_enable = 1
custom_softkey_talking.url = http://192.168.10.25/Talking.xml

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm