Yealink SIP-T33P Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
213
Topic
Label Alignment Display Configuration
Label Alignment Display Configuration
The following table lists the parameter you can use to configure the label alignment display.
Parameter
phone_setting.dsskey_label.display_method <y0000000000xx>.cfg
Description
It configures the alignment mode of the line key/Ext key label.
Note: If some Ext keys already exist before configuration, you need to refresh the page (press the
page keys, or try re-connecting the expansion module) to make the change take effect.
Permitted
Values
0-the label and icon align left
1-when the line key/Ext key is on the left side of the screen, the label and icon align left; when the line
key/Ext key is on the right side of the screen, the label and icon align right
Default
0
Supported
Devices
T54W, T46U, T46S, T46G, T33P, T33G, T29G, EXP50 connected to the T57W/T54W/T53W/T53
phones, and EXP43 connected to the T48U/T46U/T43U phones
Page Switch Key
By default, the page switch key is available only if a line key not located on the first page is assigned functionality. If
you want to configure line keys on more pages from the idle screen quickly, you can configure the line key in the
right bottom to be a page switch key.
It is only applicable to
T54W/T53W/T53/T46U/T46S/T46G/T43U/T42U/T42S/T42G/T41P/T41S/T33P/T33G/T29G/T27G phones.
Topic
Page Switch Key Configuration
Page Switch Key Configuration
The following table lists the parameter you can use to configure the page switch key.
Parameter
features.keep_switch_page_key.enable <y0000000000xx>.cfg
Description
It enables or disables the line key in the bottom right of the phone to be fixed as a page switch key.
Permitted
Values
0-Disabled, the page icons appear only if a line key not located on the first page is assigned func-
tionality. Then you can use the hard line key in the right bottom to switch pages.
1-Enabled
Default
0
Supported
T54W, T53W, T53, T46U, T46S, T46G, T43U, T42S, T42G, T42U, T41S, T41P, T33P, T33G, T29G,

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm