EasyManuals Logo

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
62
Default
1
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Mode
Parameter
static.network.l2tp_server.address
[1]
<y0000000000xx>.cfg
Description
It configures the L2TP server address.
Note: It works only if "static.network.vpn.mode" is set to 0 (L2TP).
Permitted
Values
String within 512 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Layer 2 Tunneling Protocol(L2TP) > L2TP Server Address
Parameter
static.network.l2tp_server.username
[1]
<y0000000000xx>.cfg
Description
It configures the user name of the L2TP server.
Note: It works only if "static.network.vpn.mode" is set to 0 (L2TP).
Permitted
Values
String within 512 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Layer 2 Tunneling Protocol(L2TP) > Authentication Name
Parameter
static.network.l2tp_server.password
[1]
<y0000000000xx>.cfg
Description
It configures the password of the L2TP server.
Note: It works only if "static.network.vpn.mode" is set to 0 (L2TP).
Permitted
Values
String within 512 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
Web UI
Network > Advanced > VPN > Layer 2 Tunneling Protocol(L2TP) > Authentication Password
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Example: Using VPN based on L2TP Prototol
Before you begin
You have set up the L2TP VPN server.
Procedure
1.
Set the following parameters in the configuration file and perform an auto provisioning.
#Set the VPN type to L2TP.
static.network.vpn.mode = 0

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals