EasyManuals Logo

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
56
Default
0
Web UI
Network > NAT > TURN > Active
Parameter
static.sip.nat_turn.server
[2]
<y0000000000xx>.cfg
Description
It configures the IP address or the domain name of the TURN server.
Note: It works only if “static.sip.nat_turn.enable” is set to 1 (Enabled).
Permitted
Values
IP Address or Domain Name
Default
Blank
Web UI
Network > NAT > TURN > TURN Server
Parameter
static.sip.nat_turn.port
[2]
<y0000000000xx>.cfg
Description
It configures the port of the TURN server.
Note: It works only if “static.sip.nat_turn.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 1024 to 65535
Default
3478
Web UI
Network > NAT > TURN > TURN Port (1024~65535)
Parameter
static.sip.nat_turn.username
[2]
<y0000000000xx>.cfg
Description
It configures the user name to authenticate to the TURN server.
Note: It works only if “static.sip.nat_turn.enable” is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Web UI
Network > NAT > TURN > User Name (Username)
Parameter
static.sip.nat_turn.password
[2]
<y0000000000xx>.cfg
Description
It configures the password to authenticate to the TURN server.
Note: It works only if “static.sip.nat_turn.enable” is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Web UI
Network > NAT > TURN > Password
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P) E2/CP920, X=1.
[2]
If you change this parameter, the phone will reboot to make the change take effect.
Keep Alive Configuration
Yealink phones can send keep-alive packets to the NAT device for keeping the communication port open.
The following table lists the parameters you can use to configure keep alive.

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals