Yealink SIP-T33P Administrator's Guide

Call Features
354
Call Features
This chapter shows you how to configure the call feature on Yealink phones.
Topics
Dial Plan Defined by Four Patterns (Old Dial Plan Mechanism)
Dial Plan Defined by Digit Map (New Dial Plan Mechanism)
Emergency Dialplan and Enhanced 911
Hotline
Off Hook Hot Line Dialing
Live Dialpad
Auto Redial
Recall Configuration
Speed Dial
Password Dial
Call Timeout
Anonymous Call
Call Number Filter
IP Address Call
Ignoring Incoming Calls
Off Hook Answering
Auto Answer
Anonymous Call Rejection
Call Waiting
Do Not Disturb (DND)
Multiple Call Appearances
Call Hold
Call Mute
Call Forward
Call Transfer
Conference
USB Recording
Multicast Paging
Dial Plan Defined by Four Patterns (Old Dial Plan Mechanism)
Dial plan is a string of characters that governs the way how the phones process the inputs received from the IP
phone’s keypads. You can use the regular expression to define the dial plan.
Yealink phones support four patterns:
l
Replace rule: is an alternative string that replaces the numbers entered by the user. Yealink phones support up
to 100 replace rules.
l
Dial now: is a string used to match numbers entered by the user. When entered numbers match the predefined
dial now rule, the phone will automatically dial out the numbers without pressing the send key. Yealink phones
support up to 100 dial now rules.
l
Area code: are also known as Numbering Plan Areas (NPAs). They usually indicate geographical areas in one
country. When entered numbers match the predefined area code rule, the phone will automatically add the area
code before the numbers when dialing out them. Yealink phones only support one area code rule.
l
Block out: prevents users from dialing out specific numbers. When entered numbers match the predefined block
out rule, the phone screen prompts “Forbidden Number”. Yealink phones support up to 10 block out rules.
You can configure these four patterns via the web user interface or auto provisioning. For replace rule and dial now,
you can select to add the rule one by one or using the template file to add multiple rules at a time.
Note: If you enable a new dial plan mechanism, old dial plan will be ignored. For more information on the new dial plan, refer
to Dial Plan Defined by Digit Map (New Dial Plan Mechanism).

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm