EasyManuals Logo

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #163 background imageLoading...
Page #163 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
159
Default
0
Supported
Devices
All phones except CP920
Parameter
voice.headset_send
[1]
<y0000000000xx>.cfg
Description
It configures the sending volume of the headset.
Note: We recommend that you modify this parameter cautiously. An unsuitable value may render the
voice quality bad.
Permitted
Values
Integer from -50 to 50
Default
0
Supported
Devices
All phones except CP920
Web UI
Features > Audio > Headset Send Volume (-50~50)
Parameter
voice.headset.autoreset_spk_vol <y0000000000xx>.cfg
Description
It configures the headset's volume level during a call.
Permitted
Values
0-The headset volume at the end of a call persists between calls.
1 to 15-The headset volume does not persist between calls, and resets to this specified level each
new call.
Default
0
Supported
Devices
All phones except CP920
Parameter
voice.side_tone
[1]
<y0000000000xx>.cfg
Description
It configures the volume of the sidetone.
Permitted
Values
Integer from -100 to 0
Default
-25
Parameter
voice.handset.tia4965.enable <y0000000000xx>.cfg
Description
It enables or disables the handset's volume level to be reset to level 11 after the call if the volume
level for the current call exceeds the standards.
Note: The value configured by the parameter “voice.handset.autoreset_spk_vol” takes precedence
over that configured by this parameter.
Permitted
Values
0-Disabled
1-Enabled, if the handset's volume level for the current call is adjusted to level 12/13/14/15, the
volume level automatically resets to 11 after the call. That is, the initial volume level is 11 for the next
call.
Default
1
Supported
Devices
All phones except T48G, T46G, T42G, T41P, T29G and CP920
Parameter
voice.headset.tia4965.enable <y0000000000xx>.cfg
Description
It enables or disables the headset's volume level to be reset to level 11 after the call if the volume
level for the current call exceeds the standards.
Note: The value configured by the parameter “voice.headset.autoreset_spk_vol” takes precedence

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals