Yealink SIP-T33P Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
165
Parameter
voice.tone.autoanswer <y0000000000xx>.cfg
Description
It customizes the warning tone for the auto answer.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set
it to 0.
Permitted
Values
String
Default
Blank
Web UI
Settings > Tones > Auto Answer
Parameter
voice.tone.stutterdial <y0000000000xx>.cfg
Description
It customizes the dial tone when DND or call forward is activated or the phone has a new voice mes-
sage.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom and "voice.tone.stutter_dial_tone.apply_to_
dnd.enable"/"voice.tone.stutter_dial_tone.apply_to_fwd.enable"/"voice.tone.stutter_dial_tone.apply_
to_vm.enable" is set to 1 (Enabled). If you want to disable this warning tone, set it to 0.
Permitted
Values
String within 512 characters
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T33P, T33G, T31P, T31G, T31, T30P, T30
Web UI
Settings > Tones > Stutter Dial
Parameter
voice.tone.stutter_dial_tone.apply_to_dnd.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to play a specified dial tone when DND is activated on the phone.
The dial tone is configured by "voice.tone.stutterdial".
Note: It works only if “voice.tone.country” is set to Custom.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T33P, T33G, T31P, T31G, T31, T30P, T30
Parameter
voice.tone.stutter_dial_tone.apply_to_fwd.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to play a specified dial tone when call forward is activated on the
phone.
The dial tone is configured by "voice.tone.stutterdial".
Note: It works only if “voice.tone.country” is set to Custom.
Permitted
Values
0-Disabled
1-Enabled
Default
0

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm