EasyManuals Logo

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #171 background imageLoading...
Page #171 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
167
Codec Algorithm Reference Bit Rate Sample Rate Packetization Time
G726-16 G.726 RFC 3551 16 Kbps 8 Ksps 20ms
G726-24 G.726 RFC 3551 24 Kbps 8 Ksps 20ms
G726-32 G.726 RFC 3551 32 Kbps 8 Ksps 20ms
G726-40 G.726 RFC 3551 40 Kbps 8 Ksps 20ms
G723_53/ G723_63 G.723.1 RFC 3551
5.3 Kbps
6.3 Kbps
8 Ksps 30ms
iLBC_15_2kbps iLBC RFC 3952 15.2 Kbps 8 Ksps 20ms
iLBC_13_33kbps iLBC RFC 3952 13.33 Kbps 8 Ksps 30ms
opus opus RFC 6716
8-12 Kbps
16-20 Kbps
28-40 Kbps
48-64 Kbps
64-128 Kbps
8 Ksps
12 Ksps
16 Ksps
24 Ksps
48 Ksps
20ms
Note: The network bandwidth necessary to send the encoded audio is typically 5~10% higher than the bit rate due to pack-
etization overhead. For example, a two-way G.722 audio call at 64 Kbps consumes about 135 Kbps of network bandwidth.
The Opus codec supports various audio bandwidths, defined as follows:
Abbreviation Audio Bandwidth Sample Rate (Effective)
NB (narrowband) 4 kHz 8 kHz
MB (medium-band) 6 kHz 12 kHz
WB (wideband) 8 kHz 16 kHz
SWB (super-wideband) 12 kHz 24 kHz
FB (fullband) 20 kHz 48 kHz
Note: The T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2 phones support using WB for Opus encoding, and using NB, MB,
WB, SWB and FB for Opus decoding.
The T57W/T54W/T53W/T53/T48U/T48S/T46U/T46S/T43U/T42U/T42S/T41S/T27G phones support using WB
(default) or NB for Opus encoding, and using NB, MB, WB, SWB and FB for Opus decoding.
The CP920 phones support using anyone from NB to WB for opus encoding, and using NB, MB, WB, SWB and FB
for opus decoding.
The phones support up to two calls or a three-way conference when using Opus.
The following table lists the audio codecs supported by each phone model:
Phone Model Supported Audio Codecs
Default Audio
Codecs
T48G/T46G/T42G/T41P/T29G
G722, PCMA, PCMU, G729, G726-16,
G722, PCMA, PCMU,

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals