Yealink SIP-T33P Administrator's Guide

Phone Customization
266
“Hold” types are available when you configure programmable keys.
To remove a function type, specify programmable key type IDs which start with the symbol “-”. For
example, “-14, 5, 2” means to remove “Intercom”, “DND”, “Forward” types from the Dsskey function
types list. These programmable key types are not available when you configure programmable keys.
Note: Multiple programmable key type IDs are separated by commas. “N/A” type is always kept.
Permitted
Values
Blank or 0 (all valid function types are available);
Dsskey type IDs.
For supported Dsskey types and IDs, refer to Supported Dsskey Types.
Default
Blank
Parameter
programablekey.X.type
[1]
<y0000000000xx>.cfg
Description
It configures a key feature for a specific programmable key.
Permitted
Values
0-N/A
2-Forward
5-DND
7-Recall
8-SMS
9-Pick up
13-Speed Dial
14-Intercom
22-XML Group
23-Group Pickup
24-Multicast
Paging (Paging)
27-XML Browser
28-History
30-Menu
32-New SMS
33-Status
34-Hot Desking
38-LDAP (only
appear when
“ldap.enable = 1”)
40-Prefix
41-Zero Touch
43-Local Directory (Local Phonebook)
45-Local Group
50-Phone Lock
51-Switch Account Up (not applicable to T57W/T30P/T30/T19
(P) E2)
52-Switch Account Down (not applicable to
T57W/T30P/T30/T19(P) E2)
61-Directory
66-Paging List
73-Custom Key (only appear when “features.enhanced_dss_
keys.enable = 1”)
104-Google Contacts (only appear when “google_contact_serv-
er.enable = 1”)
150-Extend (only applicable to
T54W/T53W/T53/T46U/T46S/T43U/T42S/T42U/T41S/T27G
phones)
310-Dect Intercom (only applicable to T57W/T54W/T53W/T53
phones when the DECT USB dongle is connected)
Note: The permitted values are configurable by “programablekey.type_range.custom”.
Default
X=1, default: 28 - History
X=2, default: 61 - Directory
X=3, default: 5 – DND
X=4, default: 30 - Menu
X=5, default: 28- History
X=6, default: 61- Directory
X=7, default: 51- Switch Account Up
X=8, default: 52- Switch Account Down
X=9, default: 33- Status
X=10, default: 0 - NA
X=11, default: 0 – NA
X=12, default: 0 - NA
X=13, default: 0 – NA
X=14, default: 2- Forward
X=17, default: 0 – NA
X=18, default: 0 – NA

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm