Yealink SIP-T33P Administrator's Guide

Directory
334
Parameter
ldap.password <y0000000000xx>.cfg
Description
It configures the password to log into the LDAP server.
This parameter can be left blank in case the server allows anonymous to log into. Otherwise, you will
need to provide the password to log into the LDAP server.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U:
Directory > LDAP > LDAP Password
Other Phones:
Directory > LDAP > Password
Parameter
ldap.max_hits <y0000000000xx>.cfg
Description
It configures the maximum number of search results to be returned by the LDAP server.
If the value of the “Max.Hits” is blank, the LDAP server will return all searched results. Please note that
a very large value of the “Max. Hits” will slow down the LDAP search speed, therefore it should be con-
figured according to the available bandwidth.
Permitted
Values
Integer from 1 to 1000
Default
50
Web UI
Directory > LDAP > Max Hits (1~1000)
Parameter
ldap.name_attr <y0000000000xx>.cfg
Description
It configures the name attributes of each record to be returned by the LDAP server. It compresses the
search results. You can configure multiple name attributes separated by spaces.
Example:
ldap.name_attr = cn sn
This requires the “cn” and “sn” attributes set for each contact record on the LDAP server.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Directory > LDAP > LDAP Name Attributes
Parameter
ldap.numb_attr <y0000000000xx>.cfg
Description
It configures the number attributes of each record to be returned by the LDAP server and display them
to the phone in the order of the configured attributes..
Multiple number attributes are separated by spaces.
Permitted
Values
String within 99 characters
Default
Blank
Case Scen-
ario
Contacts and attribute values on the LDAP server are configured as follows:
user0005-telephoneNumber (2598), mobile (13048957895)
user0006-telephoneNumber (3598), mobile (15956524892)
user0007-telephoneNumber (4598), mobile (blank)

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm