Yealink SIP-T33P Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
350
Permitted
Values
0-Disabled, the phone cannot log the placed calls, received calls, missed calls and the forwarded
calls in the call lists.
1-Enabled
Default
1
Web UI
Features > General Information > Save Call Log
Phone UI
Color Screen Phones:
Menu > Features > Others > General > History Record
Black-and-white Screen Phones:
Menu > Features > History Setting > History Record
Parameter
account.X.missed_calllog
[1]
<MAC>.cfg
Description
It enables or disables the phone to record missed calls for account X.
Note: It works only if “features.save_call_history” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Account > Basic > Missed Call Log
Parameter
pstn.account.X.missed_calllog
[2]
<MAC>.cfg
Description
It enables or disables the phone to indicate and record missed calls for PSTN account X.
Note: It works only if “features.save_call_history” is set to 1 (Enabled). The prompt message displays
only if “features.missed_call_popup.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled, the phone does not display a prompt message and an indicator icon on the idle screen
and log the missed call in the Missed Calls list when it misses calls.
1-Enabled, the phone displays a prompt message and an indicator icon on the idle screen and logs
the missed call in the Missed Calls list when it misses calls.
Default
1
Supported
Devices
CP920
Web UI
Account > Basic > Missed Call Log
Parameter
features.call_log_show_num <y0000000000xx>.cfg
Description
It configures the display type of the other party’s information in the call log lists.
Note: It works only if “features.save_call_history” is set to 1 (Enabled).
Permitted
Values
0-Name, the name is displayed preferentially; if there is no name, the number is displayed
1-Number
2-Name & Number, the name and number are displayed; if there is no name, the number is displayed
Default
0
Web UI
Features > General Information > Call List Show Number
Parameter
features.calllog_detailed_information <y0000000000xx>.cfg
Description
It enables or disables the phone to indicate what happened to the call in the call log lists.
It is applicable to the following scenarios:

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm