EasyManuals Logo

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #395 background imageLoading...
Page #395 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
391
manually.
Default
1
Supported
Devices
All phones except CP920
Parameter
features.dnd.emergency_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to receive incoming calls from authorized numbers when the DND
feature is enabled.
Note: The authorized numbers are configured by the parameter “features.dnd.emergency_author-
ized_number”. It works only if “features.dnd.allow” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Features > Forward&DND > DND > DND Emergency
Parameter
features.dnd.emergency_authorized_number <y0000000000xx>.cfg
Description
It configures the authorized numbers the phone can receive incoming calls from even if DND feature
is activated.
Multiple numbers are separated by commas.
Example:
features.dnd.emergency_authorized_number = 123,124
Note: It works only if “features.dnd.allow” and “features.dnd.emergency_enable are set to 1
(Enabled).
Permitted
Values
String within 511 characters
Default
Blank
Web UI
Features > Forward&DND > DND > DND Authorized Numbers
Parameter
features.dnd_refuse_code <y0000000000xx>.cfg
Description
It configures a return code and reason of SIP response messages when rejecting an incoming call by
DND. A specific reason is displayed on the caller’s phone screen.
Note: It works only if “features.dnd.allow” is set to 1 (Enabled).
Permitted
Values
404-Not Found
480-Temporarily Unavailable
486-Busy Here, the caller’s phone screen will display the reason “Busy Here when the callee
enables DND feature.
600-Busy Everywhere
603-Decline
Default
480
Web UI
Features > General Information > Return Code When DND
Parameter
features.dnd.large_icon.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display a large DND icon on the idle screen.
Note: It works only if “features.dnd.allow” is set to 1 (Enabled).

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals