Yealink SIP-T33P Administrator's Guide

Call Features
402
Default
1
Parameter
features.fwd_mode <y0000000000xx>.cfg
Description
It configures the call forward mode.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled).
Permitted
Values
0-Phone, call forward feature is effective on a phone basis.
1-Custom, you can configure call forward feature on a per-line basis.
Default
0
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Web UI
Features > Forward&DND > Forward > Mode
Parameter
features.forward.emergency.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to receive the call from authorized numbers when the call forward fea-
ture is activated.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled, the call from authorized numbers will not be forwarded when the call forward feature is
activated.
Default
0
Web UI
Features > Forward&DND > Forward > Forward Emergency
Parameter
features.forward.emergency.authorized_number <y0000000000xx>.cfg
Description
It configures the authorized numbers.
The call from the authorized numbers cannot be forwarded even if the call forward feature is activated.
Multiple numbers are separated by commas.
Note: It works only if “features.fwd.allow” and “features.forward.emergency.enable” are set to 1
(Enabled).
Permitted
Values
String within 511 characters
Default
Blank
Web UI
Features > Forward&DND > Forward > Forward Authorized Numbers
Parameter
forward.international.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to forward incoming calls to international numbers (the prefix is 00).
Note: It works only if “features.fwd.allow” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Features > General Information > Fwd International
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > FWD International > FWD International
Black-and-white Screen Phones:

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm