Yealink SIP-T33P Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
42
Web UI
Network > Wi-Fi > Add >SSID
Phone UI
Color Screen Phones:
Menu > Basic > Wi-Fi > Wi-Fi (On) > Known Network (press Add) > SSID
Menu > Basic > Wi-Fi > Wi-Fi (On) > Known Network > Option > Edit > SSID
Black-and-white Screen Phones:
Menu > Settings > Basic Settings > Wi-Fi (On) > Known Network (press Add) > SSID
Menu > Settings > Basic Settings > Wi-Fi > Wi-Fi (On) > Known Network > Option > Edit > SSID
Parameter
static.wifi.X.priority
[2]
<y0000000000xx>.cfg
Description
It configures the priority for a specific wireless network.
5 is the highest priority, 1 is the lowest priority.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 5
Default
1
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G,
T27G, CP920
Web UI
Network > Wi-Fi > Change Priority
Phone UI
Color Screen Phones:
Menu > Basic > Wi-Fi > Wi-Fi (On) > Known Network > Option > Move Up/Move Down
Black-and-white Screen Phones:
Menu > Settings > Basic Settings > Wi-Fi > Wi-Fi (On) > Known Network > Option > Move Up/Move
Down
Parameter
static.wifi.X.security_mode
[2]
<y0000000000xx>.cfg
Description
It configures the security mode of a specific wireless network.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled). If it is set to 802.1x EAP, the CA cer-
tificate can be uploaded by the parameter "static.network.802_1x.root_cert_url", the user certificate
can be uploaded by the parameter "static.network.802_1x.client_cert_url".
Permitted
Values
NONE, WEP, WPA/WPA2 PSK, 802.1x EAP
Default
NONE
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G,
T27G, CP920
Web UI
Network > Wi-Fi > Add >Secure Mode
Phone UI
Color Screen Phones:
Menu > Basic > Wi-Fi > Wi-Fi (On) > Known Network (press Add) > Security Mode
Menu > Basic > Wi-Fi > Wi-Fi (On) > Known Network > Option > Edit > Security Mode
Black-and-white Screen Phones:
Menu > Settings > Basic Settings > Wi-Fi (On) > Known Network (press Add) > Security Mode
Menu > Settings > Basic Settings > Wi-Fi > Wi-Fi (On) > Known Network > Option > Edit > Security
Mode
Parameter
static.wifi.X.password
[2]
<y0000000000xx>.cfg

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm