EasyManuals Logo

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #492 background imageLoading...
Page #492 background image
Advanced Features
488
Values 1-Enabled
Default
0
Parameter
account.X.sub_fail_retry_interval
[1]
<MAC>.cfg
Description
It configures the interval (in seconds) for the phone to retry to re-subscribe when subscription fails.
Permitted
Values
Integer from 0 to 3600
Default
30
Parameter
account.X.subscribe_mwi_to_vm
[1]
<MAC>.cfg
Description
It enables or disables the phone to subscribe to the message waiting indicator for the voice mail num-
ber.
Note: It works only if “account.X.subscribe_mwi is set to 1 (Enabled) and “voice_mail.number.X” is
configured.
Permitted
Values
0-Disabled, the phone will subscribe to the message waiting indicator to a specific account.
1-Enabled
Default
0
Web UI
Account > Advanced > Subscribe MWI to Voice Mail
Parameter
voice_mail.number.X
[1]
<MAC>.cfg
Description
It configures the voice mail number.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Account > Advanced > Voice Mail
Phone UI
Menu > Message > Voice Mail > Set Voice Mail Code
Parameter
account.X.display_mwi.enable
[1]
<MAC>.cfg
Description
It enables or disables the MWI alert to indicate that you have an unread voice mail message.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Account > Advanced > Voice Mail Display
Parameter
features.voice_mail_alert.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when receiving the same amount of new
voicemails.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
features.voice_mail_key_lamp_field.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to subscribe to the message waiting indicator for the voice mail num-
ber when configuring a Voice Mail dsskey.

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals