Yealink SIP-T33P Administrator's Guide

Configuration Parameters
524
Default
0
Parameter
bw.xsi.call_log.multiple_accounts.enable <y0000000000xx>.cfg
Description
It enables or disables the user to view BroadSoft Call Log for multiple accounts.
Note: It works only if “bw.xsi.call_log.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled, you will directly access the BroadSoft Call Log for the first account by default, and you can
only view the BroadSoft call log entry for the first account
1-Enabled, you are allowed to select a specific account to access the BroadSoft Call Log and view the
call log entry
Default
0
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Parameter
directory.update_time_interval <y0000000000xx>.cfg
Description
It configures the interval (in minutes) for the phone to update the data of the BroadSoft directory from
the BroadSoft server.
Note: It works only if “bw.xsi.directory.enable” and “bw.xsi.directory.update.enable” are set to 1
(Enabled).
Permitted
Values
Integer from 60 to 34560
Default
60
Parameter
bw.xsi.directory.update.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to automatically download all contacts in the BroadSoft Directory
from the server.
Note: It works only if “bw.xsi.directory.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled, the phone downloads partial contacts from the server (the maximum of contacts available
for viewing at one time is determined by the server), and you can manually download the remaining
contacts as needed.
1-Enabled
Default
1
Parameter
bw.xsi.directory.server_search_type <y0000000000xx>.cfg
Description
It configures the search type used by the server search mechanism for the BroadSoft Directory.
Note: It works only if “bw.xsi.directory.enable” is set to 1 (Enabled).
Permitted
Values
0-Include search with *search content* field
1-Forward search with search content* field
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T33P, T33G, T31P,
T31G, T31, T30P, T30, T27G and CP920
Parameter
bw_phonebook.group_common_displayname <y0000000000xx>.cfg
Description
It configures the display name on the phone screen for the group common directory.
Note: It works only if "bw.xsi.directory.enable" and "bw_phonebook.group_common_enable" are set
to 1 (Enabled).
Permitted
Values
String within 99 characters

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm