Yealink SIP-T33P Administrator's Guide

Troubleshooting Methods
541
(1) If the local log files are configured to be uploaded to the server by the parameter “static.auto_pro-
vision.local_log.backup.enable”, the phone will clear all the local log files on the phone once suc-
cessfully backing up.
(2) If “static.auto_provision.local_log.backup.enable” is set to 0 (Disabled), the phone will erase half of
the logs from the oldest log information on the phone.
Example:
static.local_log.max_file_size = 1024
Permitted
Values
T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2:
Integer from 256 to 1024
Other phones:
Integer from 256 to 2048
Default
T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2:
256
Other phones:
1024
Web UI
T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2:
Settings > Configuration > Max Log File Size (256-1024KB)
Other phones:
Settings > Configuration > Max Log File Size (256-2048KB)
Parameter
static.auto_provision.local_log.backup.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to upload the local log files to the provisioning server or a specific
server.
Note: The upload path is configured by the parameter “static.auto_provision.local_log.backup.path”.
Permitted
Values
0-Disabled
1-Enabled, the phone will upload the local log files to the provisioning server or the specific server to
back up these files when one of the following happens:
- Auto provisioning is triggered;
- The size of the local log files reaches the maximum configured by the parameter “static.local_
log.max_file_size”;
- It’s time to upload local log files according to the upload period configured by the parameter “stat-
ic.auto_provision.local_log.backup.upload_period”.
Default
0
Parameter
static.auto_provision.local_log.backup.upload_period <y0000000000xx>.cfg
Description
It configures the period (in seconds) of the local log files uploads to the provisioning server or a spe-
cific server.
Note: It works only if “static.auto_provision.local_log.backup.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 30 to 86400
Default
30
Parameter
static.auto_provision.local_log.backup.path <y0000000000xx>.cfg
Description
It configures the upload path of the local log files.

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm