Yealink SIP-T33P Administrator's Guide

Phone Provisioning
84
Description
It configures the timeout (in seconds) to transfer a file for HTTP/HTTPS connection.
Note: It has a lower priority than the value defined by the parameter “static.auto_provision.attempt_
expired_time”.
Permitted
Values
Integer from 1 to 20
Default
10
Parameter
static.auto_provision.attempt_before_failed <y0000000000xx>.cfg
Description
It configures the maximum number of attempts to transfer a file before the transfer fails during auto pro-
visioning.
Permitted
Values
Integer from 1 to 10
Default
3
Parameter
static.auto_provision.retry_delay_after_file_transfer_failed <y0000000000xx>.cfg
Description
It configures the time (in seconds) to wait after a file transfer fails before retrying the transfer via auto
provisioning.
Permitted
Values
Integer from 0 to 300
Default
5
Parameter
static.auto_provision.reboot_force.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to reboot after auto provisioning, even if there is no specific con-
figuration requiring a reboot.
Note: It works only for the current auto provisioning process. If you want the phone to reboot after
every auto provisioning process, the parameter must be always contained in the configuration file and
set to 1.
If the phone reboots repeatedly after it is set to 1, you can try to set “static.auto_provision.power_on" to
0 (Off).
Permitted
Values
0-Disabled
1-Enabled
Default
Blank
Parameter
features.action_uri_force_autop <y0000000000xx>.cfg
Description
It enables or disables the phone to end the call for triggering auto provisioning immediately when
receiving an HTTP or HTTPS GET request with the variable value set to AutoP during a call.
Note: It works only if “features.action_uri.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled, the phone triggers auto provisioning after the call.
1-Enabled
Default
0
Parameter
static.auto_provision.power_on <y0000000000xx>.cfg
Description
It triggers the power on feature to on or off.
Permitted
Values
0-Off
1-On, the phone performs auto provisioning when powered on.
Default
1

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm