EasyManuals Logo

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
Phone Provisioning
86
been inactivated for 60 minutes (1 hour) between the starting time and ending time.
Note: The phone may perform auto provisioning when you are using the phone during office hour. It
works only if static.auto_provision.weekly.enable is set to 1 (On).
Permitted
Values
Integer from 0 to 120
Default
0
Web UI
Settings > Auto Provision > Inactivity Time Expire(0~120min)
Parameter
static.auto_provision.weekly.dayofweek <y0000000000xx>.cfg
Description
It configures the days of the week for the phone to perform auto provisioning weekly.
Example:
static.auto_provision.weekly.dayofweek = 01
If “static.auto_provision.weekly_upgrade_interval” is set to 0, it means the phone performs auto pro-
visioning every Sunday and Monday.
If “static.auto_provision.weekly_upgrade_interval” is set to other value (for example, 3), it means the
phone performs auto provisioning by randomly selecting a day from Sunday and Monday every three
weeks.
Note: It works only if “static.auto_provision.weekly.enable is set to 1 (On).
Permitted
Values
0,1,2,3,4,5,6 or a combination of these digits
0-Sunday
1-Monday
2-Tuesday
3-Wednesday
4-Thursday
5-Friday
6-Saturday
Default
0123456
Web UI
Settings > Auto Provision > Day of Week
Parameter
static.auto_provision.weekly.begin_time
static.auto_provision.weekly.end_time
<y0000000000xx>.cfg
Description
It configures the starting/ending time of the day for the phone to perform auto provisioning weekly.
Note: It works only if “static.auto_provision.weekly.enable is set to 1 (On).
Permitted
Values
Time from 00:00 to 23:59
Default
00:00
Web UI
Settings > Auto Provision > Time
Parameter
static.auto_provision.flexible.enable <y0000000000xx>.cfg
Description
It triggers the flexible feature to on or off.
Note: The day within the period is based upon the phone's MAC address and does not change with a
reboot, whereas the time within the start and end is calculated again with every reboot.
Permitted
0-Off

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals