Yealink SIP-T56A - Basic Call Features; Placing a Call; Answering a Call; Ending a Call

12
Quick Start Guide
Smart Media Phone – SIP-T56A
BASIC CALL FEATURES
PLACING A CALL
Using the handset:
1. Pick up the handset.
2. Enter the number, and then tap Send.
Using the speakerphone:
1. With the handset on-hook, press .
2. Enter the number, and then tap Send.
Using the headset:
1. With the headset connected, press to activate the headset mode.
2. Enter the number, and then tap Send.
ANSWERING A CALL
Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
ENDING A CALL
Using the handset:
Hang up the handset or tap the EndCall soft key.
Using the speakerphone:
Press or EndCall.
Using the headset:
Tap the EndCall soft key.
REDIAL
• Press to enter the Placed Calls list, and then tap the desired entry.
• Press twice when the phone is idle to dial out the last dialed number.
CALL MUTE AND UN-MUTE
• Press to mute the microphone during a call.
• Press again to un-mute the call.
CALL HOLD AND RESUME
To place a call on hold:
Press or tap the Hold soft key during an active call.
Note:
• During a call, you can alternate between the headset, hands-free speakerphone and handset modes by
pressing Reject, pressing the HEADSET key, the Speakerphone key or by picking up the handset. Headset
mode requires a connected headset.