Smart Media Phone – SIP-T56A
To Resume the call, do one of the following:
• If there is only one call on hold, press or tap the Resume soft key.
• If there is more than one call on hold, tap the call you want to resume, and press or tap
the Resume soft key.
CALL TRANSFER
You can transfer a call in the following ways:
Blind Transfer
1. Press or tap the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to.
3. Press .
Semi-Attended Transfer
1. Press or tap the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press .
3. Press or tap the Transfer soft key when you hear the ring-back tone.
Attended Transfer
1. Press or Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press .
3. Press or Transfer soft key when the second party answers.
CALL FORWARD
To enable call forward:
1. Swipe down from the top of the screen to enter the control center.
2. Tap Settings->Features->Call Forward.
3. Select the desired forward type:
Always Forward----Incoming calls are forwarded unconditionally.
Busy Forward----Incoming calls are forwarded when the phone is busy.
No Answer Forward----Incoming calls are forwarded if not answered after a period of time.
4. Enter the number you want to forward to. For No Answer Forward, tap the After Ring Time field,
and then tap the desired ring time to wait before forwarding.
5. Tap to accept the change.
CALL CONFERENCE
1. Tap the Conference soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press or tap Conference.
3. Tap the Conference soft key again when the second party answers. All parties are now joined in
the conference.
4. Tap the End Call soft key to disconnect all parties.
Note:
•
You can split the conference call into two individual calls by tapping the Split soft key.
To Next Page
Loading...
Need help?
General
