EasyManuals Logo

Yealink SIP-T57W Administrator's Guide

Yealink SIP-T57W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #172 background imageLoading...
Page #172 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
169
ilbc_15_2kpbs-iLBC_15_2kbps
ilbc_13_33kpbs-iLBC_13_33kbps
Example:
account.1.codec.g722.priority = 1
Note: The priority of the codec in the disable codec list is not specified, and numerical value 1 is
defined as the highest priority in the enable codec list. The name of the audio codec in this parameter
should be the correct one as listed in the above example, otherwise, the corresponding configuration
will not take effect.
Permitted
Values
Integer from 0 to 13 (17 for CP920 phones)
Default
When the audio codec is G722.1c (48kb/s), the default value is 1;
When the audio codec is G722.1c (32kb/s), the default value is 2;
When the audio codec is G722.1c (24kb/s), the default value is 3;
When the audio codec is G722.1 (24kb/s), the default value is 4;
When the audio codec is G722, the default value is 1 (5 for CP920 phones);
When the audio codec is PCMU, the default value is 2 (6 for CP920 phones);
When the audio codec is PCMA, the default value is 3 (7 for CP920 phones);
When the audio codec is G729, the default value is 4 (8 for CP920 phones);
When the audio codec is G726_16, the default value is 0;
When the audio codec is G726_24, the default value is 0;
When the audio codec is G726_32, the default value is 0;
When the audio codec is G726_40, the default value is 0;
When the audio codec is G723_53, the default value is 0;
When the audio codec is G723_63, the default value is 0;
When the audio codec is Opus, the default value is 0;
When the audio codec is iLBC_15_2kbps, the default value is 0;
When the audio codec is iLBC_13_33kpbs, the default value is 0;
Web UI
Account > Codec > Audio Codec
Parameter
account.X.codec.opus.para
[1]
<MAC>.cfg
Description
It configures the sample rate of the Opus audio codec.
Permitted
Values
opus-fb-Opus-FB (48KHz) (only for T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U/CP920)
opus-swb-Opus-SWB (24KHz) (only for T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U/CP920)
opus-wb-Opus-WB (16KHz)
opus-mb-Opus-MB (12KHz) (only for T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U/CP920)
opus-nb-Opus-NB (8KHz)
Default
opus-wb (opus-fb for CP920 phones)
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920

Table of Contents

Other manuals for Yealink SIP-T57W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T57W and is the answer not in the manual?

Yealink SIP-T57W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Ethernet LANYes
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Security algorithmsAES, HTTPS, MD5, SRTP
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Volume controlButtons
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal7 \
Display resolution800 x 480 pixels
Front cameraNo
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth220 mm
Width259.4 mm
Height211 mm

Related product manuals