EasyManuals Logo

Yealink SIP-T57W Administrator's Guide

Yealink SIP-T57W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #264 background imageLoading...
Page #264 background image
Phone Customization
261
linekey.1.label =Sell
After provisioning, you can easily press the Group Pickup key (line key 1) to pick up an incoming call to any phone
within a predefined group of phones.
Note: If the “linekey.X.value” is not assigned with a group pickup code, the Park key will invoke the group pickup code set by
“features.pickup.group_pickup_code” or ”account.X.group_pickup_code.
Example: Setting a Line Key as Forward Key
When the phone receives an incoming call, you can press a Forward key to forward the incoming call to the preset
number.
When the phone is idle, the key behavior depends on the forward modes:
Forward Modes Key Behavior
Phone Mode
The destination number is configured:
Press the Forward key to activate/deactivate the always forward fea-
ture or switch the target among Forward keys.
The destination number is blank:
Press the Forward key to enter the forward setting screen or activ-
ate/deactivate the forward feature (if forward has been configured
from the Call Forward menu).
Custom Mode Press the Forward key to enter the forward setting screen.
The following example shows the configuration for Forward keys.
Scenario Conditions Related Topic
features.fwd.allow = 1
Call Forward
features.fwd_mode = 0
forward.idle_access_always_fwd.enable = 0
Example
######Set a Forward key for Bill######
linekey.1.type = 2
linekey.1.line =1
linekey.1.value =4603
linekey.1.label =Bill
######Set a Forward key for Tom######
linekey.2.type = 2
linekey.2.line =1
linekey.2.value =4605
linekey.2.label =Tom
After provisioning, you can easily press the Forward key (line key 1 or line key 2) to activate/deactivate the always
forward feature. For example, after pressing line key 1 to activate always forward and forward all calls to Bill (4603),
you can press the line key 1 to deactivate always forward, or press line key 2 to switch the forward target and for-
ward all calls to Tom (4605).

Table of Contents

Other manuals for Yealink SIP-T57W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T57W and is the answer not in the manual?

Yealink SIP-T57W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Ethernet LANYes
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Security algorithmsAES, HTTPS, MD5, SRTP
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Volume controlButtons
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal7 \
Display resolution800 x 480 pixels
Front cameraNo
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth220 mm
Width259.4 mm
Height211 mm

Related product manuals