EasyManuals Logo

Yealink SIP-T57W Administrator's Guide

Yealink SIP-T57W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #524 background imageLoading...
Page #524 background image
Configuration Parameters
521
Broadsoft Visual Voice Mail
Parameter
bw.voice_mail.visual.enable <y0000000000xx>.cfg
Description
It enables or disables the visual voice mail feature for the phone.
Note: It works only if “bw.xsi.enable" is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
bw.voice_mail.visual.display_videomail.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the video mails in the voice mail list.
Note: It works only if "bw.xsi.enable" and "bw.voice_mail.visual.enable" are set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
voice_mail.message_key.mode <y0000000000xx>.cfg
Description
It configures the phone behavior when pressing the MESSAGE key when the phone is idle.
Permitted
Values
0-enter the Set Voice Mail Code screen if the voice mail access code has not been configured; dial
out the voice mail access code if the voice mail access code has been configured.
1-enter the View Voice Mail screen
Default
0
Broadsoft SCA
Parameter
account.X.share_line.barge_in.enable
[1]
<MAC>.cfg
Description
It enables or disables the users to interrupt/barge into an active call on the shared line.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
account.X.shared_line_one_touch_bargein.en-
able
[1]
<MAC>.cfg
Description
It enables or disables the phone to barge in the call between remote shared line party and the third
party by pressing the line key.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
account.X.shared_line_one_touch_retrieve.en-
able
[1]
<MAC>.cfg
Description
It enables or disables the phone to retrieve the public held call on remote shared line party phone by
pressing the line key.
Permitted
0-Disabled

Table of Contents

Other manuals for Yealink SIP-T57W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T57W and is the answer not in the manual?

Yealink SIP-T57W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Ethernet LANYes
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Security algorithmsAES, HTTPS, MD5, SRTP
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Volume controlButtons
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal7 \
Display resolution800 x 480 pixels
Front cameraNo
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth220 mm
Width259.4 mm
Height211 mm

Related product manuals