EasyManuals Logo

Yealink SIP-T57W Administrator's Guide

Yealink SIP-T57W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #255 background imageLoading...
Page #255 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
252
Description
It enables or disables the minimum password strength limit.
Permitted
Values
0-Disabled
1-Enabled, when the Bluetooth device is paired with the phone, the minimum password strength can-
not be lower than 56bits.
Default
1
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920
Web UI
Features > Bluetooth > High Security Pairing
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Handset/Headset/Speakerphone Mode
Yealink phones support three ways to place/answer a call: using the handset, using the headset or using the speak-
erphone. You can disable the infrequently used audio device as required.
Topic
Handset/Headset/Speakerphone Mode Configuration
Handset/Headset/Speakerphone Mode Configuration
The following table lists the parameters you can use to configure handset/headset/speakerphone mode.
Parameter
features.speaker_mode.enable <y0000000000xx>.cfg
Description
It enables or disables the phone’s speakerphone mode.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except CP920
Parameter
features.handset_mode.enable <y0000000000xx>.cfg
Description
It enables or disables the phone’s handset mode.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except CP920
Parameter
features.group_listen_in_talking_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to enter into the group listening mode by pressing the Speakerphone
key when you first answer the call using the handset.
Note: The audio is sent only through the handset. So you are able to speak and listen through the
handset, but you can only listen through the speaker.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
All phones except CP920

Table of Contents

Other manuals for Yealink SIP-T57W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T57W and is the answer not in the manual?

Yealink SIP-T57W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Ethernet LANYes
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Security algorithmsAES, HTTPS, MD5, SRTP
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Volume controlButtons
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal7 \
Display resolution800 x 480 pixels
Front cameraNo
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth220 mm
Width259.4 mm
Height211 mm

Related product manuals