EasyManuals Logo

Yealink SIP-T57W Administrator's Guide

Yealink SIP-T57W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #192 background imageLoading...
Page #192 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
189
Values 1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > Packets Lost
Parameter
phone_setting.vq_rtcpxr_display_symm_oneway_delay.en-
able
<y0000000000xx>.cfg
Description
It enables or disables the phone to display SymmOneWayDelay on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings > Voice Monitoring > Report Options on Phone > SymmOneWayDelay
Parameter
phone_setting.vq_rtcpxr_display_round_trip_delay.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display RoundTripDelay on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings > Voice Monitoring > Report Options on Phone > RoundTripDelay
Parameter
phone_setting.vq_rtcpxr_display_moslq.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display MOS-LQ on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > MOS-LQ
Parameter
phone_setting.vq_rtcpxr_display_moscq.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display MOS-CQ on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > MOS-CQ
Central Report Collector
To operate with the central report collector, the phones must be configured to forward their voice quality reports to
the specified report collector. You can specify the report collector on a per-line basis.
Topic
Central Report Collector Configuration

Table of Contents

Other manuals for Yealink SIP-T57W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T57W and is the answer not in the manual?

Yealink SIP-T57W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Ethernet LANYes
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Security algorithmsAES, HTTPS, MD5, SRTP
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Volume controlButtons
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal7 \
Display resolution800 x 480 pixels
Front cameraNo
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth220 mm
Width259.4 mm
Height211 mm

Related product manuals