EasyManuals Logo

Yealink SIP-T57W Administrator's Guide

Yealink SIP-T57W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #300 background imageLoading...
Page #300 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
297
Web UI
Account > Register > Label
Phone UI
Menu > Settings > Advanced Settings (default password: admin) > Accounts > Label
[1]
X is the PSTN account ID. X= 1 to 2.
Registration Settings Configuration
The following table lists the parameters you can use to change the registration settings.
Parameter
account.X.enable_user_equal_phone
[1]
<MAC>.cfg
Description
It enables or disables the phone to add “user=phone to the SIP header of the INVITE message.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Account > Advanced > Send user=phone
Parameter
account.X.register_mac
[1]
<MAC>.cfg
Description
It enables or disables the phone to add MAC address to the SIP header of the REGISTER message.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Account > Advanced > SIP Send MAC
Parameter
account.X.register_line
[1]
<MAC>.cfg
Description
It enables or disables the phone to add a line number to the SIP header of the REGISTER message.
For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G: 0~15 stand for line1~line16;
For T53W/T53/T43U/T42U/T42S/T42G: 0~11 stand for line1~line12;
For T41P/T41S/T27G: 0~5 stand for line1~line6;
For T40P/T40G/T23P/T23G: 0~2 stand for line1~line3;
For T21(P) E2: 0~1 stand for line1~line2;
For T19(P) E2/CP920: 0 stands for line1.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Account > Advanced > SIP Send Line
Parameter
account.X.contact_take_line_param
[1]
<MAC>.cfg
Description
It enables or disables the phone to carry the line parameter in the Contact header of the Register mes-
sage.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.unregister_on_reboot
[1]
<MAC>.cfg

Table of Contents

Other manuals for Yealink SIP-T57W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T57W and is the answer not in the manual?

Yealink SIP-T57W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Ethernet LANYes
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Security algorithmsAES, HTTPS, MD5, SRTP
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Volume controlButtons
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal7 \
Display resolution800 x 480 pixels
Front cameraNo
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth220 mm
Width259.4 mm
Height211 mm

Related product manuals