EasyManuals Logo

Yealink SIP-T57W Administrator's Guide

Yealink SIP-T57W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #530 background imageLoading...
Page #530 background image
Configuration Parameters
527
Parameter
blf.listen_barge_in_code <y0000000000xx>.cfg
Description
It configures the feature access code for barging in the active call of the monitored line in listening
mode.
If configured, you can press the Listen BargeIn soft key to barge in the call. You are automatically
muted so you can listen on the call only. Your outbound audio can not be transmitted to either party.
Note: It applies to the Alcatel-Lucent CTS only.
Permitted
Values
String within 32 characters
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P, T29G, T19(P) E2 and CP920
Case Scen-
ario
The feature access code is *32. A (your phone) monitors party B (number: 8866), party B and party C
is during the call.
Set the following:
blf.listen_barge_in_code = *32
features.blf.show_callinfo.enable = 1
During the call of the monitored line, long press the BLF key and you press the Listen BargeIn soft
key, then the phone calls *328866 to barge in the call. You are automatically muted, so you can hear
all call participants, but no one can hear you.
Related
Parameters
features.blf.show_callinfo.enable
Ethernet Interface MTU Parameters
Parameter
static.network.mtu_value
[1]
<y0000000000xx>.cfg
Description
It configures the Ethernet interface Maximum Transmission Unit (MTU) on the phones.
Permitted
Values
Integer from 1280 to 1500
Default
1500
Parameter
static.network.set_fragment.enable <y0000000000xx>.cfg
Description
It enables or disables the fragmented packet sending.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T27G and CP920
[1]
If you change this parameter, the phone will reboot to make the change take effect.
SIP Settings Parameters
Parameter
account.X.compact_header_enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to support compact SIP header.
Permitted
0-Disabled

Table of Contents

Other manuals for Yealink SIP-T57W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T57W and is the answer not in the manual?

Yealink SIP-T57W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Ethernet LANYes
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Security algorithmsAES, HTTPS, MD5, SRTP
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Volume controlButtons
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal7 \
Display resolution800 x 480 pixels
Front cameraNo
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth220 mm
Width259.4 mm
Height211 mm

Related product manuals