EasyManuals Logo

Yealink SIP-T57W Administrator's Guide

Yealink SIP-T57W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #184 background imageLoading...
Page #184 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
181
Web UI
Account > Advanced > DTMF Payload Type(96~127)
Parameter
account.X.dtmf.info_type
[1]
<MAC>.cfg
Description
It configures the DTMF info type.
Note: It works only if “account.X.dtmf.type” is set to 2 (SIP INFO) or 3 (RFC2833 + SIP INFO).
Permitted
Values
1-DTMF-Relay
2-DTMF
3-Telephone-Event
Default
1
Web UI
Account > Advanced > DTMF Info Type
Parameter
features.dtmf.repetition <y0000000000xx>.cfg
Description
It configures the repetition times for the phone to send the end RTP Event packet during an active call.
Permitted
Values
1, 2 or 3
Default
3
Web UI
Features > General Information > DTMF Repetition
Parameter
features.dtmf.duration
[2]
<y0000000000xx>.cfg
Description
It configures the duration time (in milliseconds) for each digit when a sequence of DTMF tones is
played out automatically.
Note: If the time interval between two DTMF digits is less than this value, two or more same DTMF
digits could be identified as one DTMF digit. This may cause the loss of one or more DTMF digits. For
example, 2662 may be identified as 262. If so, you can modify the value of this parameter to a little
lower than the default value.
Permitted
Values
Integer from 0 to 700
Default
100
Parameter
features.dtmf.volume <y0000000000xx>.cfg
Description
It configures the volume of the DTMF tone (in dB).
Permitted
Values
Integer from -33 to 0
Default
-10
Parameter
features.dtmf.min_interval <y0000000000xx>.cfg
Description
It configures the minimum inter-digit time (in milliseconds) between digits when a sequence of DTMF
tones is played out automatically.
Permitted
Values
Integer from 0 to 300
Default
50

Table of Contents

Other manuals for Yealink SIP-T57W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T57W and is the answer not in the manual?

Yealink SIP-T57W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Ethernet LANYes
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Security algorithmsAES, HTTPS, MD5, SRTP
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Volume controlButtons
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal7 \
Display resolution800 x 480 pixels
Front cameraNo
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth220 mm
Width259.4 mm
Height211 mm

Related product manuals