EasyManuals Logo

Yealink SIP-T57W Administrator's Guide

Yealink SIP-T57W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #240 background imageLoading...
Page #240 background image
Phone Customization
237
Default
Blank
Parameter
features.custom_softkey_dynamic.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the soft keys relevant to the features (call center, cent-
ralized call recording, and executive-assistant).
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled, the functional soft keys display on the phone screen if the corresponding feature is avail-
able.
Default
1
Parameter
custom_softkey_call_failed.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the CallFailed state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
custom_softkey_call_in.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the CallIn state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
custom_softkey_connecting.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the Connecting state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
custom_softkey_dialing.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the Dialing state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Supported
Devices
All phones except T57W, T48U, T48S and T48G
Parameter
custom_softkey_ring_back.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the RingBack state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters

Table of Contents

Other manuals for Yealink SIP-T57W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T57W and is the answer not in the manual?

Yealink SIP-T57W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Ethernet LANYes
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Security algorithmsAES, HTTPS, MD5, SRTP
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Volume controlButtons
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal7 \
Display resolution800 x 480 pixels
Front cameraNo
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth220 mm
Width259.4 mm
Height211 mm

Related product manuals