EasyManuals Logo

Yealink SIP-T57W Administrator's Guide

Yealink SIP-T57W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #367 background imageLoading...
Page #367 background image
Call Features
364
Distribution configuration (configure a string of positive integers separated by “|” for each string of the
digit map in the corresponding position)
If there are more digit maps than timeout values, the last timeout is applied to the extra digit map. If
there are more timeout values than digit maps, the extra timeout values are ignored.
Example:
account.1.dialplan.digitmap.interdigit_short_timer = 4|5|3|6|2|1
If “dialplan.digitmap.string” is set to <[2-9]x:86 > 3.T|2T|1xxT|0x.!|[2-9]11T, 4 is applied to the “<[2-
9]x:86 > 3.T digit map, 5 is applied to “2T” digit map, 3 is applied to “1xxT” digit map, 6 is applied to
“0x.! digit map, 2 is applied to the “[2-9]11T digit map, the last digit 1 is ignored.
Default
3
Parameter
account.X.dialplan.digitmap.no_match_action
[1]
<MAC>.cfg
Description
It configures the behavior when an impossible digit map match occurs.
Note: It works only if “account.X.dialplan.digitmap.enable is set to 1 (Enabled). The value configured
by the parameter “account.X.dialplan.digitmap.no_match_action takes precedence over that con-
figured by the parameter “dialplan.digitmap.no_match_action”.
Permitted
Values
0-prevent users from entering a number and immediately dial out the entered numbers
1-the dialing will fail and the phone screen will prompt “Forbidden Number”
2-allow users to accumulate digits and dispatch call manually with the send key or automatically dial
out the entered number after a certain period of time configured by the parameter “dial-
plan.digitmap.interdigit_long_timer”
Default
Blank
Parameter
account.X.dialplan.digitmap.active.on_hook_dialing
[1]
<MAC>.cfg
Description
It enables or disables the entered numbers to match the predefined string of the digit map in real time
on the pre-dialing screen.
To enter the pre-dialing screen, directly enter numbers when the phone is idle.
Note: It works only if “account.X.dialplan.digitmap.enable is set to 1 (Enabled). The value configured
by the parameter “account.X.dialplan.digitmap.active.on_hook_dialing takes precedence over that
configured by the parameter “dialplan.digitmap.active.on_hook_dialing”.
Permitted
Values
0-Disabled
1-Enabled
Default
Blank
Parameter
account.X.dialplan.digitmap.apply_to.on_hook_dial
[1]
<MAC>.cfg
Description
It enables or disables the entered number to match the predefined string of the digit map after press-
ing a send key on the pre-dialing screen or pressing the DSS key (for example, speed dial, BLF or pre-
fix DSS key).
To enter the pre-dialing screen, directly enter numbers when the phone is idle.
Note: It works only if “account.X.dialplan.digitmap.enable is set to 1 (Enabled). The value configured
by the parameter “account.X.dialplan.digitmap.apply_to.on_hook_dial” takes precedence over that
configured by the parameter “dialplan.digitmap.apply_to.on_hook_dial”.
Permitted
Values
0-Disabled
1-Enabled
Default
Blank
Parameter
account.X.dialplan.digitmap.apply_to.directory_dial
[1]
<MAC>.cfg

Table of Contents

Other manuals for Yealink SIP-T57W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T57W and is the answer not in the manual?

Yealink SIP-T57W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Ethernet LANYes
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Security algorithmsAES, HTTPS, MD5, SRTP
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Volume controlButtons
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal7 \
Display resolution800 x 480 pixels
Front cameraNo
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth220 mm
Width259.4 mm
Height211 mm

Related product manuals