Yealink SIP-T57W Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
510
Values
Default
Blank
Parameter
account.X.call_center.call_info_enable
[1]
<MAC>.cfg
Description
It enables or disables the call center call information feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.call_center.show_call_info_time
[1]
<MAC>.cfg
Description
It configures the interval (in seconds) to specify how long the call center call information displays.
Note: It works only if "account.X.call_center.call_info_enable" is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 86400
Default
30
Parameter
account.X.call_center.disp_code_enable
[1]
<MAC>.cfg
Description
It enables or disables the disposition code feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.call_center.trace_enable
[1]
<MAC>.cfg
Description
It enables or disables the customer originated trace feature.
Permitted
Values
0-Disabled
1-Enabled, it is used to trace the origin of an obscene, harassing, or threatening call.
Default
0
Parameter
account.X.call_center.emergency_enable
[1]
<MAC>.cfg
Description
It enables or disables the emergency escalation feature.
Permitted
Values
0-Disabled
1-Enabled, it provides the capability for the call center agent to immediately escalate a call to a super-
visor by pressing a key on the phone. The supervisor is immediately joined into the call.
Default
0
Parameter
account.X.call_center.queue_status_enable
[1]
<MAC>.cfg
Description
It enables or disables the queue status notification feature.
Permitted
Values
0-Disabled
1-Enabled, it enables the agent to view the status of the call center queue on the phone. The queue
can be in one of three states: empty, Q'ing and ALERT.
Default
0
Parameter
account.X.call_center.queue_status_light_enable
[1]
<MAC>.cfg
Description
It enables or disables the power LED indicator to flash when the ACD calls in the queue have

Yealink SIP-T57W Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Ethernet LAN	Yes
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Security algorithms	AES, HTTPS, MD5, SRTP
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Volume control	Buttons
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	7 \
Display resolution	800 x 480 pixels
Front camera	No
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Voice codecs	G.722, G.723.1, G.726, G.729A, G.729B, iLBC

Weight and Dimensions

Depth	220 mm
Width	259.4 mm
Height	211 mm