User Guide for SIP-T58V/A Smart Media Phone
130
To configure search source list in dialing via web user interface:
1. Click on Directory->Setting.
2. In the Search Source List In Dialing block, select the desired list from the Disabled
column and click .
The selected list appears in the Enabled column.
3. Repeat the step 2 to add more lists to the Enabled column.
4. (Optional.) To remove a list from the Enabled column, select the desired list and then
click .
5. To adjust the display order of the enabled list, select the desired list, and click
or .
6. Click Confirm to accept the change.
The touch screen will display search results in the adjusted order.
Note
To search for an entry in the enabled search source lists:
1. Pick up the handset, press the Speakerphone key or tap the line key.
2. Enter a few continuous characters of the entry’s name or continuous numbers of the
entry’s phone number (office, mobile or other number).
The entries in the enabled search source lists whose name or phone number matches the
characters entered will appear on the touch screen.
Search source list in dialing is configurable via web user interface only.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
